Intel NUC10i7FNH NUC 10 Performance Mini PC Kit - Intel Core i7 Processor, Black

Product Information

Gen NUCs are equipped with an SDXC Slot. Unfortunately, there is no driver available for ESXi at the moment so it's not possible to use the SD Card slot.

The Intel NUC10i7FNH that we will be reviewing is the NUC10i7FNHAA Performance Mini PC which comes 16 GB of RAM, a 256 GB M.2-based SATA SSD, a 7mm 1TB SATA3 HDD, a Core i7-10710U CPU with an integrated Intel UHD Graphics 620 GPU and Windows 10 Home. Connectivity into it very good as it has 6 USB ports, WiFi, and an 1Gb RJ45 port. Intel NUC NUC10i7FNH Specifications This option explains how to create the Custom Image with PowerCLI. The Image can be used to install ESXi from scratch. William Lam has also provided a solution that uses the vSphere HTML5 Client. Export-ESXImageProfile -ImageProfile "ESXi-7.0.0-15843807-standard" -ExportToBundle -filepath ESXi-7.0.0-15843807-standard.zip I Uninstalled all Windows updates for the past 21 days, even though this issue only started about 14 days ago.

Revisi USB

cpu0:1048756)vmw_ahci[000000170]: CompletionBottomHalf:SCSI cmd 0x2a on slot 2 lba=0x314400, lbc=0x400 The hard drive is connected to the board using a slender ribbon cable that can be easily slotted in and out, as shown in the picture below. Our evaluation was processed with the hard drive disconnected completely from the board.​ Intel has another Comet Lake NUC called the NUC10i7FN K. Whereas the NUC10i7FN H has 2” tall case and a 2.5” SATA drive slot the NUC10i7FN K case is slightly shorter at 1.5” and does not have a SATA drive slot. The mainboard and the CPU are the same in both of these systems. cpu1:1050772 opID=8c9cc0e1)CpuSched: 813: user latency of 1051479 J6AsyncReplayManager 0 changed by 1050772 vpxa-worker -6 The installation is very simple. Remove 4 screws on the bottom and remove the lid to access M.2 and Memory slots. The assembly takes about 5 minutes to open the NUC, install memory and an NVMe SSD module. For the first time, I've decided to go with the small (K) version which has no 2.5" drive slot.

cpu7:1048610)ScsiDeviceIO: 4267: Cmd(0x4578c135c880) 0x2a, CmdSN 0x46e from world 1051479 to dev "t10.ATA_____HGST_HTS725050A7E630__________________________RC250ACB1WJ0MJ" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x4 0x44 I did try the setting in BIOS of 75 min temp, 25 Duty Cycle and 5 duty cycle increase, this was much better, basically because I limited the RPMs..I have found a reproducible error pattern ... If I want to move a VM from another host to the NUC10, the process stops at about 30% ...