276°
Posted 20 hours ago

Black Fire Cement 1250 C - 310ml for Fireplace, Stove, Boilers etc

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Does not contain Asbestos or other harmful components: Soudal Firecement HT° is free of asbestos and any other harmful components, ensuring a safer working and living environment. Heat retardant sealing at existing constructions: Soudal Firecement HT° can be used for heat retardant sealing in existing constructions, providing reliable protection against high temperatures. Apart from this, professionals also recommend cleaning all surfaces from dust, grease, oils, and other contaminant substances. You should take a step further and wet all the surfaces before applying the fire putty. How Long for Fire Cement to Dry? Clean any uncured sealant immediately after use with water. Wipe off any excess sealant to avoid it drying on surfaces. Please note that once the sealant cures, it becomes difficult to remove. Therefore, it is essential to clean the product residue promptly. The solution to both those problems is silicon sealant, like the Heatmate High Temperature Silicone Sealant we sell. Why use high temperature silicone sealant?

Experts recommend using masking tape around the top and bottom of the seal so that a clean straight edge of the heat resistant cement can be applied and exposed to the heat. A slight heating up of the installation during 12 hours after application of Firecement HT° will prevent the forming of bubbles and improve the sealant structure. Heat Resistant up to 1500°C: This fire cement sealant is specially formulated to withstand extreme temperatures of up to 1500°C, providing reliable heat resistance in demanding applications.Apply Consistent Pressure: Apply consistent pressure on the caulking gun trigger to dispense the sealant. Start at one end of the joint or gap and steadily move along its length. Of course, there are lots of other uses for high temperature silicone sealant that don’t involve your woodburner. What people say about Heatmate High Temperature Silicone Sealant

Ready to use: Soudal Firecement HT° is ready to use straight from the container, eliminating the need for additional mixing or preparation. Curing Time: Allow the sealant to dry and cure according to the manufacturer's instructions. The curing time may vary depending on environmental conditions, but ensure the caulk is fully cured before painting or finishing. If you are NOT fitting a liner, but installing a clip-together chimney system (twin-wall), then you will secure your twin-wall adaptor to your vitreous (or to your stove if directly attached) using fire cement or fireproof webbing (webbing is so much neater and more effective). Do not let any unnecessary putty to dry out on the surfaces of the stove or flue pipe. This excessive fire cement can become incredibly difficult to remove later on.

Installing a stove in a fireplace - what do I need?

Gr8Fires on How this living room was transformed with a media wall featuring the Ezee Glow Celestial Built-In Electric Fire Once the sealant is applied, it can be smoothly finished using the Soudaglatt Smoothing Tool or a similar tool of your choice. Simply run the tool smoothly along the sealant line to create an even finish. If a smoothing tool is not available, a wetted finger can be used to achieve a similar effect. Perform the finishing process before the sealant begins to skin, ensuring a neat and tidy appearance. Sealing of joints and openings at furnaces, chimney flues, heating systems, central heatings, barbecues, etc.: This fire cement sealant is suitable for a wide range of applications, including sealing joints and openings in furnaces, chimney flues, heating systems, central heatings, barbecues, and more. What is the maximum output in kW of your "5kW" wood burning stove? The majority of manufacturers just specify the “nominal output” and this figure means very little in real life. The nominal is a figure the manufacturer chooses to sell the stove at - the stove is capable of reaching at least this output with one fuel load. Nominal means "capable of". But it is not the maximum.

Fire Cement is a ready and mixed combination of thermosetting resins and inorganic fillers. When applied and exposed to high temperatures, this combination is capable of healing, which results in a mortar. This mortar is temperature resistant up to 1250ºC. No wood-burning stove installation is complete with a trusty tube of high temperature silicone sealant. Fire Rating of 120 minutes (Test Report 7830): Soudal Firecement HT° has a tested fire rating of 120 minutes, demonstrating its exceptional fire resistance and reliability. Soudal Firecement HT° is a top-quality, high temperature resistant fire cement sealant designed for applications where extreme heat is a concern. With its exceptional capabilities, this product offers reliable sealing and protection in various environments. It is effortless to use, ready to be applied directly from the container without any additional mixing or preparation.Fire putty is also widely used for sealing against the escape of smoke and flue gases in residential and commercial appliances, such as stoves, chimneys, and central heating systems. How to Use Fire Cement on Flue Pipe? For obvious reasons, you will want to make sure that the stove and flue is correctly sealed before starting to use it. Any gases and smoke produced by your woodburner need to be burnt in the firebox when flammable, then make their way up your flue pipe. Before applying Soudal Firecement HT°, it is essential to ensure that the surfaces are clean, dry, and free of dust and grease. Any loose debris or contaminants should be removed thoroughly.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment