Glade Sense & Spray Air Freshener, Motion Activated Automatic Odour Eliminator for Home, Clean Linen, Starter Kit with Holder & 18 ml Refill

Product Information

With an attractive design that blends into your home decor, you can add fragrance with any of your favourite Glade Sense and Spray refills, including Clean Linen.

This rather interesting device claims to have “motion sensor technology”, featuring a small refill that lasts about a month. The fragrance is dispensed by a valve in the air freshener that is activated by a relay driver type circuit. Moreover, motion air fresheners are effective because they don't require any type of air freshener to own. Canister should be placed on top of the tan pull tab (pull tan tab when replacing refill for easy removal.If the connection is correct you should see 10k ohms between the end of R10 closest to the drilled hole R and the base of the pre-amp transistor. I was sent this to review but I wouldn't purchase it again for our home, I think if you have it in a small space it may work well but the smell seems to get lost in our house so unless you're standing right near it the smell is very faint.

An inviting comforting bouquet of essential oils from the luxury exotic tropic; with notes of monoi blossom, elderflower and sweet coconut milk. If you do require precise ingredient information you should consult the manufacturer, whose contact details will appear on the packaging or label. The advantage of using a motion sensor room spray lies in its ability to conserve the fragrance, as it activates only in the presence of movement, contributing to the longevity of the product.your home decor, you can add fragrance with any of your favourite Glade Sense and Spray refills, including Clean Linen. For optimal performance, it is important to position the device in an area with good air circulation and regular human activity.

It seems that their motion sensing is nothing more sophisticated than monitoring when the light level on the phototransistor falls – this is why they claim a maximum 5-feet range, and the need for adequate light.I did open mine which is from 2007 but didn’t manage to understand it due to luck of instruments and too much knowledge to test whatever. I wonder if this is indicative that the daughter PCB is actually a programmable microcontroller, that’s factory programmed/tested through the unused pins, or whether this controller can be utilized for more sophisticated air fresheners.